Some shopping malls, manufacturers, or companies may need to lease diesel generators temporarily, so Nantong diesel generator manufacturers will tell you about the daily maintenance methods, let's learn about it.

Maintenance standards:

Ensure that the amount of oil in the fuel tank is more than 1/2 of the volume of the entire mailbox. The surface of the fuel tank should be clean. No oil leakage or dripping is allowed at each welding place. No impurities are allowed inside the coarse filter installed at the mailbox port, and the oil outlet pipe , The oil return pipe and the oil drain screw at the bottom of the mailbox must be tightened, and the entire oil tank must be firmly fixed.

Equipment needed:

Cotton yarn, torx wrench.

Maintenance method:

1. How to check the amount of oil. For fuel tanks equipped with transparent measuring tubes, only need to go through visual inspection; for fuel tanks equipped with fuel gauges, the scales can be removed by hand for inspection; for fuel tanks without measuring pipes and fuel gauges, they should be removed Check the fuel tank cap. If the amount of oil does not meet the requirements, it should be added in time.

2. Checking method for oil leakage at the weld. First observe whether there are oil traces under the welding part of the entire fuel tank. If there are oil traces in a certain part, check the welding part carefully. When there is oil leakage at the welding part, the fuel tank should be removed, the diesel inside should be drained, and then the fuel tank should be filled with fresh water and repaired by welding.

3. Inspection of various fixing screws. First, visually observe whether there are any traces of oil at the oil pipe, return pipe, and the oil drain screw at the bottom of the mailbox. If there is any oil, use a Torx wrench to tighten the screws.

4. Wipe clean the outside of the fuel tank with cotton yarn or machine cloth.