Dredger traversing system: Yingkou ship repair

1. Dredger traverse winch: Through the operation of the dredger driver, the traverse winch produces forward or reverse rotation, which plays a role in retracting and retracting the traverse. When the dredger is to swing to one side, tighten the lateral cable on that side and relax the cable on the other side; vice versa.

2. The dredger traverse cable: It is a steel wire rope, one end is connected to the traverse winch through an underwater guide pulley, and one end is connected to the traverse anchor.

3. Dredger guide pulley: connected to the reamer bridge to change the direction of the lateral movement.

Introduction of dredger lateral movement system

4. Dredger's traversing anchor: thrown outside the excavation section as a fixed support point for the traversing cable. If the length permits, it can be slightly farther, so that the forward distance of the dredger can be controlled farther. The traverse anchor is projected through an anchor boat or an anchor rod.

5. Anchor rods for dredgers: common on new dredgers, installed on both sides of the bow. The driver completes the work of projecting the traverse anchor by operating on the bridge, which reduces the workload of the anchor boat and the labor intensity of the crew.

The above is the relevant introduction about the lateral movement system of the dredger. I hope that the introduction of the above content can be helpful to you.